Campbell-hausfeld SDM-CD16AC Manuel d'utilisateur

SDM-CD16AC 16 ChannelAC/DC ControllerRevision: 8/07Copyright © 1987-2007Campbell Scientific, Inc.

SDM-CD16AC 16 Channel AC/DC Controller DeviceNeutral (-) Hot (+) NO NC COM FIGURE 4. Typical Wiring Application 4.1.3 Motor Control The CD16AC is

SDM-CD16AC 16 Channel AC/DC Controller FIGURE 5. CD16AC Relay Outputs to MCC 5. Address Selection Switches Each SDM-CD16AC can have 1 of 16 address

SDM-CD16AC 16 Channel AC/DC Controller 01230123BAADDRESSES FIGURE 6. Addressing 6. Datalogger Programming In CRBasic, the SDMCD16AC instruction is u

SDM-CD16AC 16 Channel AC/DC Controller CDCtrl(1) will be sent to port 1, the value held in CDCtrl(2) will be sent to port 2, etc. The value held in CD

SDM-CD16AC 16 Channel AC/DC Controller The number of SDM-CD16ACs to be addressed is defined by the Reps (repetitions) parameter. Each Rep will sequen

SDM-CD16AC 16 Channel AC/DC Controller 'Dimension Variables Public src(32) Dim i, count, mask(16) 'Program BeginProg for i=1 to 16 mask(i

SDM-CD16AC 16 Channel AC/DC Controller Input Location assignments are as follows: Input Location Location Label Description 1..5 Temp #1..#5 Avg te

SDM-CD16AC 16 Channel AC/DC Controller 9: Else (P94) Else, If the heater is off, 10: Z=F (P30) 1: 0 F Enter a "0" into he

SDM-CD16AC 16 Channel AC/DC Controller 21: End (P95) End Then Do/Else/End END COOLER CONTROL LOGIC START FAN CONTROL LOGIC BASED ON HEATER/COO

SDM-CD16AC 16 Channel AC/DC Controller 32: If Flag/Port (P91) If flag 2 is set 1: 12 Do if flag 2 is high 2: 30 Then Do Then 33: Begin

Warranty and Assistance The SDM-CD16AC 16 CHANNEL AC/DC CONTROLLER is warranted by CAMPBELL SCIENTIFIC, INC. to be free from defects in materials and

SDM-CD16AC 16 Channel AC/DC Controller This is a blank page. 16

This is a blank page.

Campbell Scientific Companies Campbell Scientific, Inc. (CSI) 815 West 1800 North Logan, Utah 84321 UNITED STATES www.campbellsci.com info@campbells

SDM-CD16AC Table of Contents PDF viewers note: These page numbers refer to the printed version of this document. Use the Adobe Acrobat® bookmarks ta

This is a blank page.

SDM-CD16AC 16 Channel AC/DC Controller 01230123ADDRESSESGNDC1C2C3+12VAUTOONOFF16151413121110987654321AUTOONOFFC2C2C216C2C2C216C2C2C216C2C2C216C2C2C216

SDM-CD16AC 16 Channel AC/DC Controller 2. Control Specifications Operating voltage: 12 VDC nominal (9 to 18). Current drain at 12 VDC: 6 mA quiesce

SDM-CD16AC 16 Channel AC/DC Controller Position of Contacts When Position of Contacts When Coil is Energized (ON) Coil Is Not Energi

SDM-CD16AC 16 Channel AC/DC Controller TABLE 1. Datalogger to SDM-CD16AC Connections Connection Order SDM-CD16AC Datalogger (see note) Function F

SDM-CD16AC 16 Channel AC/DC Controller Cables connecting the terminals of the datalogger and SDM device should be kept as short as possible to minimiz